Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Sygno-fi Wireless Fire System

Sygno-fi Wireless Remote Indicator

Sygno-fi Wireless Remote Indicator

The SYG-RI Sygno-fi Wireless Remote Indicator is a programmable output device which can be operated by the control panel in the event of fire, alarm or fault conditions from selected devices.

The activation command is sent from the control panel to the indicator through the wireless translator module.

Bi-directional communications with the wireless translator is based on a proven protocol and wireless technology and is fast, reliable and provides the highest level of security.

Sygno-fi Translator

Sygno-fi Conventional Expander Module

The SYG-CEM Sygno-fi Conventional Expander Module has been designed to allow the integration of wireless detection and alarm type field devices onto almost any type of system.

Regardless of whether the system is intelligent or conventional the unit can be simply connected to a conventional zone and sounder circuit, directly or via loop modules. The wireless field devices connect to the system as non-addressable devices, but still utilise the same technology as Sygno-fi intelligent wireless devices. They are fully monitored for alarm and fault, ensuring the highest levels of life safety and reliability are maintained. All wireless communications rely on a channel pair for spurious RF noise rejections and maximum link reliability.

Sygno-fi Translator

Sygno-fi Expander Module

The SYG-EM Sygno-fi Expander Module is compatible with all Sygno-fi wireless intelligent translators and the conventional expander.

The unit provides a convenient method to increase radio communication range beyond that possible from a single translator by relaying the radio communication to further expanders or directly to the wireless field devices, allowing to build large fully wireless systems or add wireless devices onto areas where cabling for translators is difficult or impossible.

The expanders are programmable for a redundant path to the translator, so that if any expander in the chain fails, the transmission path can find an alternate route. The redundant paths are identified and tested during system commissioning for maximum reliability. All the wireless communication relies on a channel pair for spurious RF noise rejections and maximum link reliability. All expanders are fully monitored ensuring that the highest levels of life safety are maintained.

Sygno-fi Black Expander Module

Sygno-fi Expander Module - Black

The SYG-EM-B Sygno-fi Expander Module is compatible with all Sygno-fi wireless intelligent translators and the conventional expander.

The unit provides a convenient method to increase radio communication range beyond that possible from a single translator by relaying the radio communication to further expanders or directly to the wireless field devices, allowing to build large fully wireless systems or add wireless devices onto areas where cabling for translators is difficult or impossible.

The expanders are programmable for a redundant path to the translator, so that if any expander in the chain fails, the transmission path can find an alternate route. The redundant paths are identified and tested during system commissioning for maximum reliability. All the wireless communication relies on a channel pair for spurious RF noise rejections and maximum link reliability. All expanders are fully monitored ensuring that the highest levels of life safety are maintained.

Sygno-fi Heat Detector SYG-TA (2021)

Sygno-fi Heat Detector

The SYG-TA Sygno-fi Heat Detector is the latest in wireless heat detector technology. The detector is a fully intelligent device designed to give the best possible warning of a fire condition in locations where smoke detection technology is not suitable.

The device is capable of being configured as either a high temperature or rate of rise device type. The well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved. An in-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS | SYG-BSB-23W | SYG-BSB-23R

Sygno-fi Black Heat Detector

Sygno-fi Heat Detector - Black

The SYG-TA-B Sygno-fi Heat Detector is the latest in wireless heat detector technology. The detector is a fully intelligent device designed to give the best possible warning of a fire condition in locations where smoke detection technology is not suitable.

The device is capable of being configured as either a high temperature or rate of rise device type. The well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved. An in-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS-B | SYG-BSB-23W-B

Sygno-fi Input Module SYG-IM (2021) 1

Sygno-fi Input Module

The SYG-IM Sygno-fi Input Module has a single fully monitored input circuit which allows simple integration of third party equipment with the fire system.

The unit is fully compatible with all the Sygno-fi translator and expander modules and the adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability.

Sygno-fi Manual Call Point

Sygno-fi Manual Call Point

The SYG-CP Sygno-fi Manual Call Point (MCP) is a fully intelligent device which is compatible with all Sygno-fi translator and expander modules.

The unit has a resettable plastic element, which displays a drop down warning indicator when operated. A key is supplied with the MCP for reset and case opening.

The product is powered by two lithium CR123A batteries with a typical life of 10 years.

A transparent cover protects against accidental operation, whilst a weatherproof enclosure is available for use outdoors or in hostile environments.

Sygno-fi Multi-Sensor Detector SYG-MA (2021)

Sygno-fi Multi-Sensor Detector

The SYG-MA Sygno-fi multi-sensor detector is the latest in wireless multi-sensor detector technology.

The detector is a fully intelligent device combining both dual optical smoke and heat detection technologies for improved performance, whilst maintaining high levels of unwanted alarm rejection.

Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved. An in-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS | SYG-BSB-23W | SYG-BSB-23R

Sygno-fi Black Heat Detector

Sygno-fi Multi-Sensor Detector - Black

The SYG-MA-B Sygno-fi multi-sensor detector is the latest in wireless multi-sensor detector technology.

The detector is a fully intelligent device combining both dual optical smoke and heat detection technologies for improved performance, whilst maintaining high levels of unwanted alarm rejection.

Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved. An in-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS-B | SYG-BSB-23W-B

Sygno-fi Optical Detector SYG-PA (2021)

Sygno-fi Optical Detector

The SYG-PA Sygno-fi Optical Detector is the latest in wireless smoke detector technology. The detector utilises dual optical smoke detection technologies and algorithms for improved performance, maintaining the highest levels of false alarm rejection.

Utilising well-proven adaptive radio signal processing algorithms it ensures the highest levels of life safety and system reliability are achieved. In-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS | SYG-BSB-23W | SYG-BSB-23R

Sygno-fi Black Optical Detector

Sygno-fi Optical Detector - Black

The SYG-PA-B Sygno-fi Optical Detector is the latest in wireless smoke detector technology. The detector utilises dual optical smoke detection technologies and algorithms for improved performance, maintaining the highest levels of false alarm rejection.

Utilising well-proven adaptive radio signal processing algorithms it ensures the highest levels of life safety and system reliability are achieved. In-built magnet test allows easy activation to verify correct functionality and response.

This device is supplied with a standard base and is compatible with the following sounder bases:
SYG-BS-B | SYG-BSB-23W-B

Sygno-fi Output Module

Sygno-fi Output Module

The SYG-OM Sygno-fi Output Module has been designed to allow easy control of a variety of third party equipment including access control doors, ventilation plant and fire extinguishing systems.

The unit is powered entirely from its internal battery supply and is fitted as standard with both a set of change over relay contacts and a 12/24V dc output.

The output is capable of supplying power for operating low current third party equipment directly from the internal batteries.

Sygno-fi Sounder Base SYG-BS (2021)

Sygno-fi Sounder Base

The SYG-BS Sygno-fi Sounder Base unit is a high performance wireless sounder base that can be used as stand-alone notification device (with a blanking cap) or as a combined detection and alarm device when fitted with an integral Sygno-fi optical, heat or multi detector.

The SYG-BS unit has as standard 32+32 recognised sounder tones (primary and secondary) and 4 levels of volume adjustment, all of which can be easily configured on site.

It is powered by standard lithium batteries and utilising well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and reliability.

Sygno-fi Sounder Base - Black

Sygno-fi Sounder Base - Black

The SYG-BS-B Sygno-fi Sounder Base unit is a high performance wireless sounder base that can be used as stand-alone notification device (with a blanking cap) or as a combined detection and alarm device when fitted with an integral Sygno-fi optical, heat or multi detector.

The SYG-BS-B unit has as standard 32+32 recognised sounder tones (primary and secondary) and 4 levels of volume adjustment, all of which can be easily configured on site.

It is powered by standard lithium batteries and utilising well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and reliability.

Sygno-fi Black Base Sounder VAD

Sygno-fi Sounder VAD Base - Black (White Flash)

The SYG-BSB-23W-B Sygno-fi Sounder VAD base(white flash) is a high performance device, incorporating an EN54-23 compliant VAD used to alert people in the event of a fire.

Each unit has an integral moulded base for mounting an wireless detector or a sounder cover if a detector is not required. The unit has as standard 32 recognised sounder tones (primary and secondary) and 4 levels of volume adjustment, as well as high power/low power visual settings, all of which can be easily configured on site.

Powered by standard lithium batteries and utilising well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and reliability.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.