Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Eurotech Intelligent Devices

download

Eurotech Intelligent Device Programmer Unit

The hand held EURV-AD2 Programmer unit is designed to program and various parameters stored within the Eurotech range of detectors.

All other intelligent devices can be programmed via a plug in cable which is supplied with this device.

The 100-8003V is also designed to program the Eurotech base sounders or base sounder beacons and also the heat detectors. The user interacts with the EURV-AD2 device using a built-in keypad and display.

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent Optical Smoke Detector

The EURV-P Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

 

 

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent Optical Smoke Detector – with Isolator

The EURV-PI Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

A bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panel.

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent A1R Heat Detector

The EURV-H-A1R Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol. An integral magnet test facility allows easy activation to verify correct functionality and reporting.

The EURV-H-A1R heat detector supervises environmental temperature with low thermal inertia allowing the device to operate as an A1R or BS detector. This is selectable using the 100-8003V programming tool.

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent A1R Heat Detector – with Isolator

The EURV-H-A1RI Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol. An integral magnet test facility allows easy activation to verify correct functionality and reporting.

The EURV-H-A1RI heat detector supervises environmental temperature with low thermal inertia allowing the device to operate as an A1R or BS detector. This is selectable using the 100-8003V programming tool.

A bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panel.

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent Multi-Sensor Detector

The EURV-PH Intelligent Multi-Criteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition. Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

EUW-PA-02 wireless optical smoke detector

Eurotech Intelligent Multi-Sensor Detector – with Isolator

The EURV-PHI Intelligent Multi-Criteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition. Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

A bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panel.

100-2203V Eurotech Intelligent Manual Call Point

Eurotech Intelligent Manual Call Point

The Eurotech resettable indoor call point is smooth and quick to install thanks to the easy wiring design and the front operating element that snaps into place requiring no additional tools.
The call point benefits from improved levels of visibility thanks to a reflective polyester flag at the bottom of the operating face and a brightly illuminated LED ring in the centre of the active area which allows the alarm condition to be viewed over a wide angle of 170 degrees. The alarm flag indicator can be easily reset using the call point key provided, making the call point ready for immediate re-use.
Waterproof Manual Call Point

Eurotech Intelligent Weatherproof Manual Call Point – with Isolator

The EURV-MCP-IP67 Intelligent Waterproof Manual Call Point is compatible with all fire control panels utilising the Eurotech fully digital communication protocol. Reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. The operating “glass” element on the front face of the Call Point and the alarm flag indicator can be easily reset using a special key. Therefore, after activation, the call point can be quickly restored to its normal quiescent state making it ready for immediate re-use. The Call Point design also provides bi-directional short circuit isolators, plus a visual LED indicator to confirm communication polling and alarm activation.
The weatherproof element has been designed and engineered to provide protection for devices exposed to hostile environments. Applications include off-shore, the food and beverage industry, swimming pools and leisure centres, underground installations and any area where exposure to the environment is likely to cause damage to equipment.
Standard Intellignet Base

Eurotech Intelligent Detector Base

The standard intelligent low profile mounting base has been designed for use with any of the Eurotech point type intelligent detector range. The base’s layout allows plenty of space for cable access and has multiple mounting-hole positions for use with a variety of back boxes. The unit has terminations for loop wiring, remote indicator connection and termination of shield cabling. When no device is fitted into the base, an automatic spring connection maintains loop continuity ready for loop cable testing. Once the device is refitted the spring is displaced allowing the loop isolators to operate.

100-2010V

Eurotech Intelligent Slave Base Sounder

The EURV-ABSS is an aesthetically pleasing low profile Intelligent Sounder Base. When used in conjunction with an associated intelligent detector the unit can be controlled via the cause and effect programming of a compatible control panel utilising the Eurotech digital protocol. The unit has integral DIP switches allowing the independent adjustment of both sounder Volume and Tone settings. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

100-2010V

Eurotech Intelligent Platform Base Sounder

The Eurotech Platform Base Sounder incorporates all of the features of the 100-5013V and more; Each device takes one unique address from the range of 1 to 240. A Bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panels. The number of devices on the loop is determined by the total loop load calculation.

100-5011V

Eurotech Intelligent Platform Base Sounder Beacon

The EURV-ABSB is a fully intelligent and aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. By utilising the Eurotech fully digital communication protocol, reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. Once installed on to a compatible loop the device is fully addressable and benefits from an extensive range of intelligent functionality, including sounder synchronisation. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.
100-5011V

Eurotech Intelligent Platform Slave Base Sounder Beacon

The EURV-ABSBS is an aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. When used in conjunction with an associated intelligent detector the unit can be controlled via the cause and effect programming of a compatible control panel utilising the Eurotech digital protocol. The unit has integral DIP switches allowing the independent adjustment of both sounder Volume and Tone settings. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

100-2114V

Eurotech Intelligent Wall Mounted Sounder

The EURV-WSR Intelligent Wall Sounder forms the core of our modular alarm device range. The unit is fully addressable. All devices are weather proof, therefore this combined with the modular approach means the majority of applications can be achieved with very few stock components. The unit is equipped with 3 levels of volume adjustment and 32 recognised tones which can be set via the control equipment or locally at the sounder.

100-2011V

Eurotech Intelligent Wall Mounted Sounder Beacon

The EURV-AV  Wall Sounder VAD forms the core of our EN54-23 modular visual alarm device (VAD) range. The unit is fully intelligent.  All devices are weather proof therefore this combined with the modular approach means the majority of applications can be achieved with very few stock components. The unit is equipped with 3 levels of volume adjustment, high output LED beacon and 32 recognised tones which can be set via the control equipment or locally at the sounder.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.