The FB-AK Anti-Fog Kit has been developed to overcome the problems of condensation, this special kit contains a reflector and lens cover that have been treated with a nano technology finish that will not mist over.
The anti-fog reflector is also available individually.
Key Features
A long range anti-fog reflector kit for the esp FIREbeam smoke detector, provides coverage of up to 100 metres.
The FB-AW Anti-Fog Lens Window has been developed to overcome the problems of condensation, the lens cover has been treated with a Nano technology finish that will not mist over. The anti-fog reflector (not included) is also available individually.
Shipping Weight: 300 g
The FB-ARS is a specially treated short-range reflector for the FB-1 FIREbeam detector. Its surface is treated with a Nano tehnology finish that will not mist over. Ideal for high-condensation areas.
This special anti-fog reflector has been treated with a nano technology finish that will not mist over in environments prone to condensation.
Key Features
| Product Codes | Description |
| FB-ARL | FIREbeam Anti-fog Reflector – Long Range (80-100m) |
| FB-ARM | FIREbeam Anti-fog Reflector – Mid Range (40-80m) |
| FB-ARS | FIREbeam Antifog Reflector Short 5-40m |
Designed to cover distances between 80 and 100 metres, the Fire Beam Long Range Kit is a clear acrylic plate with 8 extra reflectors attached. Simply add the Single Reflector that is provided with the standard Fire Beam into the spare space on the plate using the screws provided.
For your convenience, the plate is pre-drilled to suit the universally popular Unistrut system. If you need to fit a Fire Beam Head Unit into a position where it is not possible to screw into then you may wish to use the Adaptor Plate.
The Unistrut Adaptor Plate is a clear acrylic plate that allows easy mounting of the Fire Beam Head Unit to Unistrut fabrication. The holes are pre-drilled to the correct pitch of the Head Unit and are conveniently positioned for use with the popular Unistrut system using the screws provided.
Glass Element for Call Point – with Hochiki logo
The CHQ-CP2 is a loop powered single input monitor unit designed to be used as a call point module for special applications such as addressable key-switches and explosion proof call points. The default device type allocated by the Fire Alarm Control Panel will be a call point.
Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.
The CHQ-ARI(WHT) is a loop-powered Addressable Remote Indicator, with high-intensity LEDs and a Fresnel lens design which produces a highly visible signal.
The casing exactly matches the Hochiki white ESP sensor range in shape and colour providing seamless integration.
The unit can be used on the standard white ESP base (YBN-R/3(WHT)), the white base sounder (YBO-BS(WHT)), the white base sounder beacon (YBO-BSB(WHT)) or the white short-circuit isolator base (YBO-R/SCI(WHT)).
Key Features:
The CHQ-PCM/DIN(SCI) is a loop powered input/output module with four independent change-over relay outputs and four monitored inputs. The outputs feature N/O and N/C volt free contacts and can be driven separately under the control of the fire alarm panel, to be used for the control of devices such as dampers or for plant and equipment shutdown. The four inputs are provided for local fire and fault monitoring and these are fully monitored for open and short circuit, which if required, can be enabled or disabled in pairs using a two-way DIL switch. Note: The state of the relay contacts will be indeterminate until the unit is powered.
The CHQ-PCM(SCI) is a loop powered input/output module with four independent change-over relay outputs and four monitored inputs. The outputs feature N/O and N/C volt free contacts and can be driven separately under the control of the fire alarm panel, to be used for the control of devices such as dampers or for plant and equipment shutdown. The four inputs are provided for local fire and fault monitoring and these are fully monitored for open and short circuit, which if required, can be enabled or disabled in pairs using a two-way DIL switch.
The unit is also available in a DIN Rail mountable enclosure – CHQ-PCM/DIN(SCI). A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-PCM(SCI), increases the IP rating to IP65. When using heavy cables we recommend the use of the SMB-1 Module Enclosure in conjunction with the SMB-ADAPTOR plate.
Key Features:
Model CHQ-WS2 is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)).
The YBD-RA(WHT) Surface Wiring Adaptor allows the majority of Hochiki Sensors/Detectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring (without conduit) to be connected.
The adaptor features four 9mm x 8mm knock-outs for cables/wires allowing surface-fixed wiring to be connected to an appropriate mounting base (depending on application). The adaptor is moulded in ivory white ABS as standard, which allows seamless integration with the majority of mounting bases and associated sensors and detectors.
Key Features:
Need to talk to a member of the team?
Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.
