Speak to our experts

+44 (0) 203 141 0999

Speak to our experts

+44 (0) 203 141 0999

Hochiki Analogue Wall Sounder (White)

CHQ-WS2 Datasheet

Part Number CHQ-WS2 Categories Audio Visual Equipment, Hochiki, Hochiki, Hochiki Intelligent Devices

Talk to our specialists

(0)203 141 0999

Description

Description

Model CHQ-WS2 is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBO-R/3(RED)) or the Isolator Base (YBO-R/SCI(RED)). The sounder is IP rated to IP21 for internal use but it can be made weatherproof by utilising the WS2-WPK Weatherproof Kit, which consists of a specialised back box and gasket set.

Also incorporates an auto shutdown mode which allows the user to set a fixed time within which the sounder will operate, before automatically silencing itself, ideal for minimising noise pollution.

Key Features:

Loop Powered
Single Loop Address – addressed via the TCH-B100 Hand Held Programmer
Variable Sound Output 90 ~ 102 dB(A) (+/-2 dB(A)) output at 1 metre
Fits Hochiki Standard or Isolator Base
Weatherproof Kit available
51 User-Selectable Tones (all tones EN54-3 compatible)
Also available in white
Approved by LPCB & VdS

Eurotech Intelligent Manual Call Point

The Eurotech resettable indoor call point is smooth and quick to install thanks to the easy wiring design and the front operating element that snaps into place requiring no additional tools.
The call point benefits from improved levels of visibility thanks to a reflective polyester flag at the bottom of the operating face and a brightly illuminated LED ring in the centre of the active area which allows the alarm condition to be viewed over a wide angle of 170 degrees. The alarm flag indicator can be easily reset using the call point key provided, making the call point ready for immediate re-use.

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.

18-20 Stratfield Park
Elettra Avenue
Waterlooville
PO7 7XN
United Kingdom

Speak to our Experts

+44 (0) 203 141 0999