Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Devices

EURV-MRU

Eurotech 240V Mains Rated Relay Unit

The EURV-MRU 240V Mains Rated Relay Unit upgrades a standard EURV-OM-RM output module to a unit capable of switching mains voltages and higher currents. Utilising an existing module for communication, control and monitoring functions means the unit is fully compatible with all panels supporting the Eurotech loop protocol. The unit can easily be upgraded to a wireless variant by adding the 240EOL-01 end of line module and connecting to a EUW-BOM-03 wireless output module. The units are perfect for switching mains voltage to equipment such as dampers and sound systems or where higher current switching is required at lower voltages.

Module_Zone

Eurotech Intelligent Zone Monitor Module | EURV-ZMU

The conventional zone monitor connects a zone of conventional detectors to a Eurotech intelligent loop. The device has an onboard relay output driven by the control panel. The conventional zone module is designed to provide different current limits. The module detects open circuits, short circuit and monitors an external power supply. The communication loop is fully isolated from the conventional zone module and from the power supply.

smoke detector

Odyssey Conventional Optical Smoke Detector

The Odyssey Conventional Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector but has an indicator LED which is clear in quiescent state but produces a red light in alarm.

  • Responds well to slow-burning, smouldering fires
  • Well suited for bedrooms and escape routes
  • Unaffected by wind or atmospheric pressure
  • Flashing LED and magnet operated test switch option
200-400

Odyssey A1R Heat Detector

The Odyssey Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 4 heat detectors in the Odyssey Conventional designed to suit a wide variety of operating conditions.

  • Can be used for applications where smoke detectors are unsuitable
  • Ideal for environments that are dirty or smokey under natural conditions
  • Wide operating voltage
  • Flashing LED and magnet operated test switch option
200-403

Odyssey CS Heat Detector

The Odyssey Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 4 heat detectors in the Odyssey Conventional designed to suit a wide variety of operating conditions.

  • Can be used for applications where smoke detectors are unsuitable
  • Ideal for environments that are dirty or smoky under natural conditions
  • Wide operating voltage
  • Flashing LED and magnet operated test switch option
200-401

Odyssey BR Heat Detector

The Odyssey Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 4 heat detectors in the Odyssey Conventional designed to suit a wide variety of operating conditions.

  • Can be used for applications where smoke detectors are unsuitable
  • Ideal for environments that are dirty or smoky under natural conditions
  • Wide operating voltage
  • Flashing LED and magnet operated test switch option
200-402

Odyssey CR Heat Detector

The Odyssey Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 4 heat detectors in the Odyssey Conventional designed to suit a wide variety of operating conditions.

  • Can be used for applications where smoke detectors are unsuitable
  • Ideal for environments that are dirty or smoky under natural conditions
  • Wide operating voltage
  • Flashing LED and magnet operated test switch option
Odyssey Standard Base

Odyssey Standard Base

The Odyssey Standard Base has been designed to enable detectors to be fitted without the need of force – particularly useful when fitting to suspended ceilings. All Odyssey bases have a ‘one way only’ fit. Detectors can be locked into place by a grub screw using a 1.5mm hexagonal screwdriver.

  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains an earth connector
  • Contains no electrical parts
  • Terminal for remote indicator
odyssey-diode-base

Odyssey Diode Base

The Odyssey Diode Base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a schottky diode on the “L1 IN” and “L1 OUT” wiring terminals. This base can only be used with compatible control equipment.

  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains an earth connector
  • Continues to work during unauthorised removal of detectors
odyssey-sav-wire-base

Odyssey Sav-Wire Base

The Odyssey Sav-Wire Base is designed to allow Odyssey conventional detectors to be used in ‘Sav-Wire’ detection and alarm systems.

  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains an earth connector
Odyssey Relay Base

Odyssey Relay Base

The Odyssey Standard Relay Base provides one set of volt-free changeover (form C) contacts that change state when the detector signals an alarm.

  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains an earth connector
odyssey-12v-relay-base

Odyssey 12V Relay Base

The Odyssey Conventional 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a ‘latching’ position. For security systems the jumper is moved to another position so that the base is ‘non-latching’.

  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains an earth connector
  • Can be used in fire and security systems
fire call point

SyCall Conventional Manual Call point

SyCall is a resettable manual call point packed with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation and pleasant aesthetical appearance and is fully approved to EN54-11.

Six modes of operation are achievable simply by choosing the appropriate internal connection terminals at the time of installation. This solution has been adopted to address the need to stock multiple units commonly seen in many other popular types of call points on the market.

The unit is highly visible in both the alarm and non-alarm state. Front facing LED and sideways facing light tubes allow the easy discovery of an activated call point.

Features

  • Red surface mount version only is approved to EN54-11
  • Very high visibility of the alarm condition
  • Visible in the dark via the unique luminescent resettable element feature
  • Easy and economical installation
  • High impact resistant ABS plastic materialalso available in blue, green and yellow
  • Clever six configurations in one unit design for reduced inventory holding
  • Surface mount and flush mount options available
  • Extremely easy to reset via the robust twist and set key
    system
fire call beacon

SyCall Conventional 2 Wire Manual Call point

SyCall is a resettable manual call point packed with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation and pleasant aesthetical appearance and is fully approved to EN54-11.

The SyCall manual call point also comes in a 2 wire (Sav-Wire) variant.

Six modes of operation are achievable simply by choosing the appropriate internal connection terminals at the time of installation. This solution has been adopted to address the need to stock multiple units commonly seen in many other popular types of call points on the market.

The unit is highly visible in both the alarm and non-alarm state. Front facing LED and sideways facing light tubes allow the easy discovery of an activated call point.

Features

  • Red surface mount version only is approved to EN54-11
  • Very high visibility of the alarm condition
  • Visible in the dark via the unique luminescent resettable element feature
  • Easy and economical installation
  • High impact resistant ABS plastic materialalso available in blue, green and yellow
  • Clever six configurations in one unit design for reduced inventory holding
  • Surface mount and flush mount options available
  • Extremely easy to reset via the robust twist and set key
    system
EVTB Red Sounder Beacon Red Lens Deep Base

EVTB Conventional Wall Sounder Beacon

The EVTB 24Vdc sounder beacon is part of the EVTG family of products designed for use with conventional fire alarm
systems including two wire (SAV-WIRE®) and other general 24Vdc applications. The sounder function, like all EVTG products, comes as standard with 32 tones. The beacon function has been designed for maximum all-round visibility, coupled with low power consumption utilising an array of energy efficient LEDs. The sounder function features a two-stage alarm override which is activated by a third negative wire from the fire panel. Both the sounder and beacon functions are fully synchronised. The product can also be used as a beacon only which is easily selected by a DIL switch at the time of installation.

Features

  • 32 tones plus a selectable override tone
  • Shallow base IP43 and deep base IP65 versions available
  • Switch selectable beacon only feature
  • Unique twist and lock bayonet mounting system
  • Removable cover on deep base for surface wiring
  • Features base locking system as standard
fire sounder wall

Eurotech Conventional Wall Mounted Sounder

The EURVC-S Conventional Wall Sounder forms the core of our modular alarm device range. The unit can either be used as a standalone conventional device or as an intelligent unit by the addition of a wired module or wireless module. All devices are weather proof, therefore this combined with the modular approach means the majority of applications can be achieved with very few stock components. The unit is equipped with 3 levels of volume adjustment and 32 recognised tones which can be set via the control equipment or locally at the sounder.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.