Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Devices

CWST-RR-S5

Conventional Beacon (Red Case, Red LEDs)

CWST-RR-S5 features high output LEDs, advanced optics and an innovative lens design, providing outstanding Omni-directional light coverage at low current draw.  Specifically designed for, and approved to meet EN54-23, the CWST-RR-S5 delivers outstanding quality, reliability and long operational life.

 

Key Features:

  • Approved to EN54-23, C & W categories
  • Advanced optics ensures superior light coverage at low current draw
  • Synchronised flash exceeds EN54-23 standard
  • Red light flash
  • Soft start feature reduces power surges during system start-up
CHQ-DRC2-DINSCI

Hochiki Dual Relay Controller (DIN Enclosure with SCI)

Model CHQ-DRC2/DIN(SCI) is a Dual Relay Controller designed to provide two general-purpose relay outputs, each output can be driven separately for control of such devices as dampers or for control of plant and equipment shutdown.  The monitored input can be used for local power supply fault monitoring or as a general-purpose input.

The unit is also available as a boxed module version; both models feature an integral short-circuit isolator.  The CHQ-DRC2/DIN(SCI) utilises simple DIL switches for reliable addressing.

 

Key Features:

  • Loop powered
  • Single loop address
  • 2 Independently controlled changeover relays
  • Relays contact rated at 30 V dc at 1 A
  • Auxiliary monitored input
  • Boxed module version available
  • Both models feature an integral short-circuit isolator
  • Both models approved by LPCB
CHQ-DRC2SCI

Hochiki Dual Relay Controller with SCI

Dual Relay Controller with SCI

CHQ-DSC2SCI

Hochiki Dual Sounder Controller with SCI

Model CHQ-DSC2/M(SCI) is a Marine Approved Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The unit utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQDSC2/M(SCI), increases the IP rating to IP65.

CHQ-DZM-DINSCI

Hochiki Dual Zone Monitor - DIN Enclosure with SCI

Model CHQ-DZM/DIN(SCI) is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system.  The unit also features a Schottky Diode line continuity option, when used inconjunction with the optional LCMU.

Full monitoring against malfunction or disconnection, together with a self-test feature through the ESP protocol, ensure the integrity of the CHQ-DZM/DIN(SCI) at all times.  The unit utilises simple DIL switches for reliable addressing.  It is also available as a boxed module (CHQ-DZM(SCI)).  Both models feature an integral short-circuit isolator.

NOTE: When Resistive EOL option is chosen the conventional zone on the CHQ-DZM/DIN(SCI) does not support any line continuity options, therefore if Call Points are being interfaced they should be wired at the beginning of the zone.

 

Key Features:

  • Single loop address
  • Supports two independent zones of conventional detectors
  • Both zones fully monitored for short/open circuit
  • Requires an auxiliary 24 V dc supply
  • Also available as a boxed module
  • Both models feature an integral short-circuit isolator
  • Approved by LPCB
Odyssey Intelligent Optical Smoke Detector

Odyssey Intelligent Optical Smoke Detector

The Odyssey Intelligent Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.

  • Responds well to slow-burning, smouldering fires
  • Well suited for bedrooms and escape routes
  • Unaffected by the wind or atmospheric pressure
200-501

Odyssey Intelligent Heat Detector

The Odyssey Intelligent Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The Odyssey range features two heat detectors, standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55°C. The high temperature detector, classified as a CS device, will report an alarm at 90°C.

  • Ideal in environments that are dirty or smoky under natural conditions
  • Well suited for warehouses, loading bays and carparks
  • Unaffected by wind or atmospheric pressure
Odyssey High Temp Heat Detector

Odyssey Intelligent High Temperature Heat Detector

The Odyssey Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The Odyssey range features two heat detectors, standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55°C. The high temperature detector, classified as a CS device, will report an alarm at 90°C.

  • Ideal in environments that are dirty or smoky under natural conditions
  • Well suited for warehouses, loading bays and carparks
  • Unaffected by wind or atmospheric pressure
200-505

Odyssey Intelligent Multi-Sensor Detector

The Odyssey Intelligent Multi-Sensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.

  • Sensitive to a wide range of fires
  • Well suited for environments such as hotel bedrooms
  • Unaffected by wind or atmospheric pressure
200-111

Odyssey Intelligent Standard Base

All detectors in the Odyssey Intelligent range, including the Odyssey Intelligent Standard Base fit the Intelligent Mounting Base. The Mounting Base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT cards are supplied with all bases.

  • XPERT Addressing
  • One way fit of detector
  • Locking feature to prevent unauthorised detector removal
download

Eurotech Intelligent Device Programmer Unit

The hand held EURV-AD2 Programmer unit is designed to program and various parameters stored within the Eurotech range of detectors.

All other intelligent devices can be programmed via a plug in cable which is supplied with this device.

The 100-8003V is also designed to program the Eurotech base sounders or base sounder beacons and also the heat detectors. The user interacts with the EURV-AD2 device using a built-in keypad and display.

[Premium]-Detector

Eurotech Intelligent Optical Smoke Detector

The EURV-P Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

 

 

[Premium]-Detector

Eurotech Intelligent Optical Smoke Detector - with Isolator

The EURV-PI Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

A bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panel.

[Premium]-Detector

Eurotech Intelligent A1R Heat Detector

The EURV-H-A1R Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol. An integral magnet test facility allows easy activation to verify correct functionality and reporting.

The EURV-H-A1R heat detector supervises environmental temperature with low thermal inertia allowing the device to operate as an A1R or BS detector. This is selectable using the 100-8003V programming tool.

[Premium]-Detector

Eurotech Intelligent A1R Heat Detector - with Isolator

The EURV-H-A1RI Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol. An integral magnet test facility allows easy activation to verify correct functionality and reporting.

The EURV-H-A1RI heat detector supervises environmental temperature with low thermal inertia allowing the device to operate as an A1R or BS detector. This is selectable using the 100-8003V programming tool.

A bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panel.

[Premium]-Detector

Eurotech Intelligent Multi-Sensor Detector

The EURV-PH Intelligent Multi-Criteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition. Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance. This detector forms part of the Eurotech range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Eurotech fully digital communication protocol.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.