Intelligent Devices

Eurotech Intelligent Detector Base

The standard intelligent low profile mounting base has been designed for use with any of the Eurotech point type intelligent detector range. The base’s layout allows plenty of space for cable access and has multiple mounting-hole positions for use with a variety of back boxes. The unit has terminations for loop wiring, remote indicator connection and termination of shield cabling. When no device is fitted into the base, an automatic spring connection maintains loop continuity ready for loop cable testing. Once the device is refitted the spring is displaced allowing the loop isolators to operate.

Eurotech Intelligent Slave Base Sounder

The EURV-ABSS is an aesthetically pleasing low profile Intelligent Sounder Base. When used in conjunction with an associated intelligent detector the unit can be controlled via the cause and effect programming of a compatible control panel utilising the Eurotech digital protocol. The unit has integral DIP switches allowing the independent adjustment of both sounder Volume and Tone settings. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

Eurotech Intelligent Platform Base Sounder

The Eurotech Platform Base Sounder incorporates all of the features of the 100-5013V and more; Each device takes one unique address from the range of 1 to 240. A Bi-directional isolator is fitted to help protect against wiring faults and allows auto addressing on compatible control panels. The number of devices on the loop is determined by the total loop load calculation.

Eurotech Intelligent Platform Base Sounder Beacon

The EURV-ABSB is a fully intelligent and aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. By utilising the Eurotech fully digital communication protocol, reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. Once installed on to a compatible loop the device is fully addressable and benefits from an extensive range of intelligent functionality, including sounder synchronisation. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

Eurotech Intelligent Platform Slave Base Sounder Beacon

The EURV-ABSBS is an aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. When used in conjunction with an associated intelligent detector the unit can be controlled via the cause and effect programming of a compatible control panel utilising the Eurotech digital protocol. The unit has integral DIP switches allowing the independent adjustment of both sounder Volume and Tone settings. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

Eurotech Intelligent Wall Mounted Sounder

The EURV-WSR Intelligent Wall Sounder forms the core of our modular alarm device range. The unit is fully addressable. All devices are weather proof, therefore this combined with the modular approach means the majority of applications can be achieved with very few stock components. The unit is equipped with 3 levels of volume adjustment and 32 recognised tones which can be set via the control equipment or locally at the sounder.

Eurotech Intelligent Wall Mounted Sounder Beacon

The EURV-AV Wall Sounder VAD forms the core of our EN54-23 modular visual alarm device (VAD) range. The unit is fully intelligent. All devices are weather proof therefore this combined with the modular approach means the majority of applications can be achieved with very few stock components. The unit is equipped with 3 levels of volume adjustment, high output LED beacon and 32 recognised tones which can be set via the control equipment or locally at the sounder.

Eurotech Remote Indicator Unit

The RIU Remote Indicator Unit is used to give a remote indication of the status of a single or groups of fire detectors in alarm state utilising
an LED with a wide area of illumination and high on/off contrast.

The units are compatible with the majority of conventional and addressable systems and can also be used for security
and process control applications.

The standard version is a single gang flush mount unit, with or without ‘Fire Detector Operated’ text and also available
with a deep back box for surface mounting.

Features

Direct fit to a single gang deep back box
Circular flush mounted version available without text
Text is available in other languages
Custom legend available on request
IP66 weatherproof version available

Eurotech Intelligent Relay Output | EURV-OM-RP

One output loop powered relay module is based on SPDT relay. The output source channel is normally a de-energised relay switched on by a command from the control panel. It is switched on by a special command from the control panel. It is available in different mounting configurations.

Eurotech Intelligent Modules are available in 3 different mounting options; Plate, Mini and DIN Rail.
100-2033V EURV-OM-RP Single Relay Output Module (Wall Mount No Box/Plate)
100-2034V EURV-OM-RM Single Relay Output Mini Module
100-2026V EURV-OM-RD Single Relay Output Module DIN Rail Mount

Odyssey Intelligent Devices

Odyssey Ancillary Base Sounder

The Ancillary Base Sounder is a local-area sounder designed for indoor use. It can be connected only to detection systems using Odyssey detectors and control panels with appropriate software.

Sound output of 85dB(A) at 1 metre
Current consumption of only 3mA
Loop-powered
Responds to signals from the associated detector – does not have an address of its own
Adjustable volume control.

Odyssey Intelligent Manual Call Point (w/ Isolator)

The Odyssey Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.

EN 54-11 Approved (EN 54-17 Approved for Isolator version)
E-Z fit connectors
Front facing addressing without the need to detach the backbox
A unique, ergonomically designed key for resetting and front cover removal
Backward compatibility and retro-fit
Resettable element

Odyssey Loop-Powered Beacons

The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

High intensity LEDs
More reliable than xenon visual indicators
Automatic LED check
Lockable
Wide angle of visibility
Enables DDA compliance
Synchronised flash
Can be used with Odyssey systems

Odyssey Intelligent Open-Area Beacons (Sonos)

The Intelligent Open-Area Beacon Visual Indicator has been developed for use in situations where there is a risk that sounders will not be heard.

For use with Odyssey systems
Self-test fault monitoring
IP65 rated
Individual and group addressing
Synchronisation of flashes
Comes with Isolating Base as standard
Loop-powered
Red and clear lens option

Odyssey Intelligent Open-Area Sounder Beacons (Sonos)

The Intelligent Open-Area Sounder Beacon Visual Indicator is designed for use in open areas and can be connected to an Odyssey system.

Self-test monitoring
Choice of tones on standard device: Odyssey, Slow Whoop and DIN
Two volume settings 92dB(A) and 100dB(A)
Individual and group addressing
Sycronisation of tones and flashes
Built in isolator
Loop-powered
IP65 rated
Red and clear lens options

Odyssey Intelligent Open-Area Sounders (Sonos)

The Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Odyssey system.

Self-test fault monitoring
Choice of tones on standard device: Odyssey, Slow Whoop and DIN
Two volume settings 92dB(A) and 100dB(A)
Synchronisation of tones
Individual and group addressing
Built in isolator
Red or white options
Loop-powered
IP65 rated

Odyssey Mini Switch Monitor

The Odyssey Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, for example a manual call point.

It is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Odyssey compatible analogue addressable control equipment.

Odyssey Switch Monitor with Isolator

The Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Odyssey compatible analogue control equipment.

Output for resetting a remote detector
Four input states – ‘normal’, ‘fault’, ‘pre-alarm’, and ‘alarm’
Two visible LEDs
Selectable alarm delay for monitoring flow switches

Odyssey 3-CH Input/Output Unit c/w Isolator

The Three Channel Input/Output Module offers the benefit of using a single address for three individually-monitored inputs and three outputs, as well as cost savings compared to using a combination of single or twin Input/Output Modules, making it the perfect solution for the following applications:

Lift bank control
Fire door control
Shop unit monitoring
Smoke damper control

Key Features:

Supervises one or more normally open switches on each of the three inputs
Loop-powered
Capable of switching up to 30V at 1A on each of the three outputs

Hochiki Intelligent Devices

Hochiki Ceiling Beacon – White case, red LEDs (7.5m)

An addressable loop-powered beacon, with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage diameters include 5m, 7.5m, 10m and 15m*2. The unit is designed to fit the YBN-R/3, YBN-R/3(SCI) or the YBO-BS base sounder and is available with an ivory, white or red casing with red or white LEDs.

Hochiki Ceiling Beacon – White case, white LEDs (15m)

Hochiki Ceiling Beacon – White case, white LEDs (7.5m)

Hochiki CHQ Module Box Lid (White)

Hochiki CHQ-BOX LID(WHT) CHQ Module Lid in White

An alternative lid for the CHQ Range of modules, manufactured in solid white ABS this lid can replace the semi-transparent black lid which is supplied as standard with the module.

Key Features:

Rugged design
Provides alternative lid option to the complete range of CHQ Modules

Hochiki Dual Relay Controller (DIN Enclosure with SCI)

Model CHQ-DRC2/DIN(SCI) is a Dual Relay Controller designed to provide two general-purpose relay outputs, each output can be driven separately for control of such devices as dampers or for control of plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.

The unit is also available as a boxed module version; both models feature an integral short-circuit isolator. The CHQ-DRC2/DIN(SCI) utilises simple DIL switches for reliable addressing.

Key Features:

Loop powered
Single loop address
2 Independently controlled changeover relays
Relays contact rated at 30 V dc at 1 A
Auxiliary monitored input
Boxed module version available
Both models feature an integral short-circuit isolator
Both models approved by LPCB

Hochiki Dual Relay Controller with SCI

Dual Relay Controller with SCI

Hochiki Dual Sounder Controller with SCI

Model CHQ-DSC2/M(SCI) is a Marine Approved Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The unit utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQDSC2/M(SCI), increases the IP rating to IP65.

Hochiki Dual Zone Monitor – DIN Enclosure with SCI

Model CHQ-DZM/DIN(SCI) is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system. The unit also features a Schottky Diode line continuity option, when used inconjunction with the optional LCMU.

Full monitoring against malfunction or disconnection, together with a self-test feature through the ESP protocol, ensure the integrity of the CHQ-DZM/DIN(SCI) at all times. The unit utilises simple DIL switches for reliable addressing. It is also available as a boxed module (CHQ-DZM(SCI)). Both models feature an integral short-circuit isolator.

NOTE: When Resistive EOL option is chosen the conventional zone on the CHQ-DZM/DIN(SCI) does not support any line continuity options, therefore if Call Points are being interfaced they should be wired at the beginning of the zone.

Key Features:

Single loop address
Supports two independent zones of conventional detectors
Both zones fully monitored for short/open circuit
Requires an auxiliary 24 V dc supply
Also available as a boxed module
Both models feature an integral short-circuit isolator
Approved by LPCB

Hochiki Glass Element for Call Point – with Hochiki logo

Glass Element for Call Point – with Hochiki logo

+44 (0) 203 141 0999

+44 (0) 203 141 0999

Intelligent Detection

Eurotech Intelligent Detector Base

Eurotech Intelligent Slave Base Sounder

Eurotech Intelligent Platform Base Sounder

Eurotech Intelligent Platform Base Sounder Beacon

Eurotech Intelligent Platform Slave Base Sounder Beacon

Eurotech Intelligent Wall Mounted Sounder

Eurotech Intelligent Wall Mounted Sounder Beacon

Eurotech Remote Indicator Unit

Features

Eurotech Intelligent Relay Output | EURV-OM-RP

Odyssey Ancillary Base Sounder

Odyssey Intelligent Manual Call Point (w/ Isolator)

Odyssey Loop-Powered Beacons

Odyssey Intelligent Open-Area Beacons (Sonos)

Odyssey Intelligent Open-Area Sounder Beacons (Sonos)

Odyssey Intelligent Open-Area Sounders (Sonos)

Odyssey Mini Switch Monitor

Odyssey Switch Monitor with Isolator

Odyssey 3-CH Input/Output Unit c/w Isolator

Hochiki Ceiling Beacon – White case, red LEDs (7.5m)

Hochiki Ceiling Beacon – White case, white LEDs (15m)

Hochiki Ceiling Beacon – White case, white LEDs (7.5m)

Hochiki CHQ Module Box Lid (White)

Hochiki Dual Relay Controller (DIN Enclosure with SCI)

Hochiki Dual Relay Controller with SCI

Hochiki Dual Sounder Controller with SCI

Hochiki Dual Zone Monitor – DIN Enclosure with SCI

Hochiki Glass Element for Call Point – with Hochiki logo

+44 (0) 203 141 0999