Speak to our experts

+44 (0) 203 141 0999

View Basket

Speak to our experts

+44 (0) 203 141 0999

View Basket

Eurotech Intelligent Platform Base Sounder Beacon

100-5011V Datasheet

Part Number 100-5011V Categories Eurotech Intelligent Devices, Intelligent Devices

Talk to our specialists

(0)203 141 0999

Description
Additional information

Description

The EURV-ABSB is a fully intelligent and aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. By utilising the Eurotech fully digital communication protocol, reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. Once installed on to a compatible loop the device is fully addressable and benefits from an extensive range of intelligent functionality, including sounder synchronisation. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.

Additional information

Key Features	• Employs fully digital Hyfire protocol • Built in loop isolators • Offers full programming options • Selection of 32 tones* • Synchronised sounder • 360 degree visibility of VID when activated • Adjustable volume output • Auto-addressable via compatible panels • Programmable via the Device Programming tool • 5 year product warranty • Includes device identification tab • Easy central cable entry *Refer to tone table for full listings and approved tones.
Technical Specification	Loop Voltage Range: 15 Vdc – 32 Vdc* Standby Current: 70 uA @ 24 Vdc Current Consumption: 5-9 mA @ 24 Vdc Max Volume: 94 dBA @ 1 metre Tone Range: 440 Hz – 2900 Hz Dimensions: 141.4 mm x 66 mm Weight: 220 g Temp Range (no icing): -10 C to +55 C Max Humidity (non condensing): 95% RH Max Loop Addresses: 240 * Min 18 Vd for operation of LED.

Key Features

• Employs fully digital Hyfire protocol
• Built in loop isolators
• Offers full programming options
• Selection of 32 tones*
• Synchronised sounder
• 360 degree visibility of VID when activated
• Adjustable volume output
• Auto-addressable via compatible panels
• Programmable via the Device Programming tool
• 5 year product warranty
• Includes device identification tab
• Easy central cable entry

*Refer to tone table for full listings and approved tones.

Technical Specification

Loop Voltage Range: 15 Vdc – 32 Vdc*
Standby Current: 70 uA @ 24 Vdc
Current Consumption: 5-9 mA @ 24 Vdc
Max Volume: 94 dBA @ 1 metre
Tone Range: 440 Hz – 2900 Hz
Dimensions: 141.4 mm x 66 mm
Weight: 220 g
Temp Range (no icing): -10 C to +55 C
Max Humidity (non condensing): 95% RH
Max Loop Addresses: 240

* Min 18 Vd for operation of LED.

Eurotech Intelligent Manual Call Point

The Eurotech resettable indoor call point is smooth and quick to install thanks to the easy wiring design and the front operating element that snaps into place requiring no additional tools.
The call point benefits from improved levels of visibility thanks to a reflective polyester flag at the bottom of the operating face and a brightly illuminated LED ring in the centre of the active area which allows the alarm condition to be viewed over a wide angle of 170 degrees. The alarm flag indicator can be easily reset using the call point key provided, making the call point ready for immediate re-use.

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.

18-20 Stratfield Park
Elettra Avenue
Waterlooville
PO7 7XN
United Kingdom

Speak to our Experts