Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Hochiki

CHQ-ISM

Hochiki Intrincially Safe Compatible Sounder Module

This Sounder Control Module interfaces between the Hochiki Analogue system via a CHQ-DSC or conventional sounder O/P’s and the intrinsically safe sounder/beacon units via an intrinsically safe barrier.

The module provides line monitoring for open or short circuits on the wiring connected to both the safe and hazardous areas.

 

Key Features:

  • Provides dual sounder circuits
  • Provides fault-monitored input
  • Interfaces between loop and I.S. sounders/beacons
  • Fully monitored for short-circuits
  • Requires 24 V dc external power supply
CHQ-ISM-DIN

Hochiki Intrincially Safe Sounder Interface Module

This Sounder Control Module interfaces between the Hochiki Analogue system via a CHQ-DSC or conventional sounder O/P’s and the intrinsically safe sounder/beacon units via an intrinsically safe barrier.

The module provides line monitoring for open or short circuits on the wiring connected to both the safe and hazardous areas.

 

Key Features:

  • Provides dual sounder circuits
  • Provides fault-monitored input
  • Interfaces between loop and I.S. sounders/beacons
  • Fully monitored for short-circuits
  • Requires 24 V dc external power supply
CCP-E-IS SIL

Hochiki Intrinsically Safe Weatherproof Conventional Call Point

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new CCP-W-IS outdoor Call Point range.

 

Key Features:

  • Sealed to IP67
  • Unique “Plug & Play” installation concept
  • Total “Flex-Ability” in the choice of operating element
  • Anti-Tamper facility
  • Enhanced aesthetics and compact design
  • Fully approved to the latest standards
  • CPD Approval
CHQ-MRC2-DINSCI

Hochiki Mains Relay Controller DIN Enclosure with SCI

Model CHQ-MRC/DIN(SCI) is a Single Input/Output Module, which provides a single, mains-rated relay output  for the control of such devices as dampers, extractors or plant and equipment shutdown.  The monitored input can be used for local power supply fault monitoring or as a general-purpose input.

The unit is supplied as a DIN Rail mountable version but is also available as a boxed module.  Both models feature an integral short-circuit isolator.  The CHQ-MRC/DIN(SCI) utilises simple DIL switches for reliable addressing.

 

Key Features:

  • Loop powered
  • Single loop address
  • Single mains rated relay contact
  • Relay Contact Rated at 250 V ac @ 5 A (resistive load only) & 48 V dc @ 2 A (resistive load only)
  • Auxiliary monitored input
  • DIN rail version available
  • Both models feature an integral short-circuit isolator
HINGED-COVER-PS200

Hochiki Manual Call Point Covers

An acrylic hinged cover for the HCP-E(SCI) manual call point range which protects against accidental operation/vandalism.

 

Key Features

  • Easy to fit
  • Protects against accidental activation
Smoke alarm

Hochiki Manual Call Point with SCI “SMOKE VENT” (Orange)

The HCP-EO(SCI) is an Analogue Addressable orange call-point based upon the industry standard KAC world series housing and features easy to install, push-fit wiring terminals. The call point features the words “SMOKE VENT”.

 

Key Features:

  • Terminals can accommodate up to a 2.5 mm solid conductor
  • Orange casing
  • Features an integral SCI
  • Approved by LPCB to EN54-11:2001
ALN-ENM

Hochiki Marine Approved Photoelectric Smoke Sensor (Ivory Case)

The ALN-EN incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications.

This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms. The ALN-EN smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.

Key Features:

  • Removable, High Performance chamber
  • Twin LEDs allow 360 viewing – green when polling, turn red in fire
  • Locking mechanism (sensor to base)
  • Variable sensitivity
  • Electronically addressed
  • Pulsing/non-pulsing controlled from panel
  • Approved by LPCB & VdS
  • SIL Level 2 approved variants available
  • Available in white
YBO-R3RED

Hochiki Mounting Base for Wall Sounders (Red)

Model YBO-R/3 is a Sounder Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors and designed specifically for the Hochiki range of wall sounders, the CHQ-WS2 Wall Sounder and the CHQ-WSB2 Wall Sounder Beacon.

 

It is supplied with square cable clamps for secure and reliable cable termination.

YBO-R-SCIRED

Hochiki Mounting Base for Wall Sounder (Red)

Model YBO-R/3 is a Sounder Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors and designed specifically for the Hochiki range of wall sounders, the CHQ-WS2 Wall Sounder and the CHQ-WSB2 Wall Sounder Beacon.

 

It is supplied with square cable clamps for secure and reliable cable termination.

YBO-R3WHT

Hochiki Mounting Base for Wall Sounders (White Case)

Model YBO-R/3 is a Sounder Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors and designed specifically for the Hochiki range of wall sounders, the CHQ-WS2 Wall Sounder and the CHQ-WSB2 Wall Sounder Beacon.

 

It is supplied with square cable clamps for secure and reliable cable termination.

ATJ-EN

Hochiki Multi-Heat Sensor (Ivory Case)

Model ATJ-EN is a Multi-Heat Sensor, which is fully compatible with Hochiki’s ESPAnalogue Addressable Protocol.

 

The ATJ-EN incorporates a Variable Temperature heat element and a Rate of Rise heatelement, both of which are controlled from the Control Panel, allowing either thermal
element or both elements simultaneously to be active in making the fire decision. Thesensor polling LEDs can also be controlled via the Control Panel (pulsing/non pulsing)

ATJ-ENWHT

Hochiki Multi-Heat Sensor (White Case)

Model ATJ-EN is a Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.

 

The ATJ-EN incorporates a Variable Temperature heat element and a Rate of Rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision. The sensor polling LEDs can also be controlled via the Control Panel (pulsing/non-pulsing)

ACC-EN

Hochiki Multi-Sensor Photoelectric/Heat – Marine Approved (Ivory Case)

Model ACC-EN is a Multi-Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol, and incorporates a thermal element and High Performance photoelectric smoke chamber.

 

The ACC-EN has three modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-EN smoke chamber can easily be removed or replaced for easy maintenance.

ACC-ENBLK

Hochiki Multi-Sensor Photoelectric/Heat (Black Case)

Model ACC-EN(BLK) is a Multi-Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol, and incorporates a thermal element and High Performance photoelectric smoke chamber. The ACC-EN(BLK) has three modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing).

 

The ACC-EN(BLK) smoke chamber can easily be removed or replaced for easy maintenance.

ACC-ENWHT

Hochiki Multi-Sensor Photoelectric/Heat (White Case)

Model ACC-EN is a Multi-Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol, and incorporates a thermal element and High Performance photoelectric smoke chamber. The ACC-EN has three modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-EN smoke chamber can easily be removed or replaced for easy maintenance.

ALN-EN

Hochiki Photoelectric Smoke Sensor – Marine Approved (Ivory Case)

ALN-ENM is a Marine Approved Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ALN-ENM incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.

 

The ALN-ENM smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.