Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Hochiki Intelligent Devices

CHQ-WPKWHT

Hochiki Weatherproofing Kit (white)

Weatherproofing Kit (white)

CHQ-ABAMB

Hochiki Loop Powered Addressable Beacon (Ivory Case w/ Amber Lens)

The CHQ-AB(AMB) is an addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration. The unit can be used on the Standard ESP Base (YBN-R/3), the Base Sounder (YBO-BS), the Base Sounder Beacon (YBO-BSB) or the Short-Circuit Isolator Base (YBO-R/SCI).

 

Key Features:

  • High Intensity LED technology
  • Variable flash frequency (dependant on control panel compatibility)
  • Addressable via Hand Held Programmer (TCH-B100)
  • Up to 127 devices per loop
  • Amber lens colour
  • Approved by VdS
CHQ-ABBLU

Hochiki Loop Powered Addressable Beacon (Ivory Case w/ Blue Lens)

The CHQ-AB(BLU) is an addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash. The casing exactly matches the Hochiki ESP Sensor range in shape and colour providing seamless integration. The unit can be used on the Standard ESP Base (YBN-R/3), the Base Sounder (YBO-BS) or the Base Sounder Beacon (YBO-BSB).

 

Key Features:

  • High Intensity LED technology
  • Variable flash frequency
  • Addressable via Hand Held Programmer (TCH-B100)
  • Up to 127 devices per loop
  • Blue lens colour
  • Approved by VdS
CHQ-MRC2SCI

Hochiki Mains Relay Controller with SCI

Model CHQ-MRC2(SCI) is a mains relay controller providing a single mains rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The mains relay controller is also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

 

Key Features:

  • Loop-powered
  • Single loop address
  • Single mains rated relay contact
  • Relay contact rated at 250 Vac @ 5 A (resistive load only) & 48Vdc @ 2 A (resistive load only)
  • Auxiliary monitored input
  • DIN rail version available
  • Both models feature an integral short-circuit isolator
  • Both models approved by LPCB
ALN-ENMWHT-MARINE

Hochiki Marine Approved Analogue Photoelectric Smoke Sensor – White Case

Model ALN-ENM is a Marine Approved Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.

The ALN-ENM incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.

The ALN-ENM smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.

CHQ-DRC2MSCI

Hochiki Marine Approved Dual Relay Controller with SCI

Marine Approved Dual Relay Controller with SCI

CHQ-DSC2-MSCI

Hochiki Marine Approved Dual Sounder Controller with SCI

Model CHQ-DSC2/M(SCI) is a Marine Approved Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. The unit utilises simple DIL switches for reliable addressing.

A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQDSC2/M(SCI), increases the IP rating to IP65.

ACC-ENM

Hochiki Marine Approved Multi-Sensor Photoelectric/Heat – Ivory case

Model ACC-ENM is a Multi-Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol, and incorporates a thermal element and High Performance photoelectric smoke chamber.

The ACC-ENM has three modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel (pulsing/non-pulsing). The ACC-ENM smoke chamber can easily be removed or replaced for easy maintenance.

CHQ-SZM2-MSCI

Hochiki Marine Approved Single Zone Monitor with SCI

Model CHQ-SZM2/M(SCI) is a Marine Approved Single Zone Monitor designed to allow up to 6 marine approved conventional detectors to be interfaced to Hochiki’s ESP analogue addressable system. The unit also features an integral short-circuit isolator. The CHQSZM2/M(SCI) utilises simple DIL switches for reliable addressing. A back box is also available (CHQ-BACKBOX) which, when used in conjunction with the CHQ-SZM2/M(SCI), increases the IP rating to IP65. The conventional zone on the CHQ-SZM2/M(SCI) does not support any line continuity options; if Call Points are being interfaced they should be wired at the beginning of the zone.

HCP-WMSCI

Hochiki Marine Approved Weatherproof Addressable Manual Call Point with SCI (Red)

Model HCP-WM(SCI) is a weatherproof Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.

The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing*1 for communications polling and is continuously lit when the unit is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit.

Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.

CHQ-BACKBOX

Hochiki Module Back Box

The CHQ-BACKBOX is designed for installations where the CHQ “Smart-Fix” Modules (CHQ-DIM, CHQ-SZM, CHQ-DZM, CHQ-DSC, CHQ-MRC, CHQ-DRC, plus SCI versions) require mounting within a glanded enclosure. The unit features ten knock-outs suitable for cable glands and accepts the CHQ Modules directly as a lid.

CHQ-SIM

Hochiki Single Input Module

The CHQ-SIM has been designed to allow a single monitored input to be connected to the ESP loop.  This provides a compact, low-cost option where the installation of the larger CHQ Range of Modules might be difficult.

The CHQ-SIM features flying leads as well as a wiring terminal block for loop connection, making installation quick and easy.  The unit is addressed with the TCH-B100 Hand Held Programmer utilising the on-board programming connector and a PL-3 lead.

 

Key Features:

  • Includes a single monitored input
  • Small design for simple provision of a monitored input onto an ESP loop
  • Flying leads for easy installation
  • Addressed with TCH-B100 Hand Held Programmer
  • Approved by LPCB & VdS

Hochiki Single Output Module

Single Output Module

SR-MOUNTING-BOX

Hochiki Surface Mounting Call Point Back Box (Red)

A surface mounted back box for the HCP-E(SCI) manual call point which is 32 mm deep.

 

Key Features

  • Durable
  • For use with HCP-E call point range
  • Allows addressable call point to be surface mounted

 

Ordering codes: SR BACKBOX
For use with: HCP-E range
Dimensions: 86 mm (W) x 86 mm (H) x 32mm
Colour / Case Material: Red / ABS

SY Mounting Box

Hochiki Surface Mounting Call Point Box (Yellow)

A surface mounted back box for the HCP-Y(SCI) yellow manual call point which is 32mm deep.

 

Key Features

  • For surface mounting of the HCP call points
  • Yellow colour
  • 32 mm deep
  • 86 mm square
CHQ-WB-WL

Hochiki Wall Beacon – Ivory case, white LEDs

An addressable loop-powered wall beacon, with a high intensity LED and a custom designed free-form optic which produces a highly visible flash. Coverage includes 5, 5.5 and 7 sqm*2. The unit is designed to fit the YBN-R/3, YBN-R/3(SCI) or the YBO-BS base sounder and is available with an ivory, white or red casing with red or white LEDs.

Need to talk to a member of the team?

Our support & sales team are keen and would love to help with any questions. Leave your details in the contact form and we will get back to you shortly.