Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Eurotech Single Input and Single Relay Output Module

Part Number 100-2037V Categories ,

Talk to our specialists

Description

The Eurotech single input and relay output modules are loop powered and designed around a fully digital protocol. The input channel is supervised and will detect normal/short/alarm/open conditions.
The output channel is normally a de-energized relay switched on by command from the panel. Fast Alarm and fault signalling.

The modules are available in different mounting configurations.

Additional information

Key Features

• Designed to meet EN54-18 standards
• Provide a high reliability and error detection
• Short-circuit isolator in each device
• Large capacity, up to 240 devices per loop
• Addressable by a special tool
• Auto-addressing capability
• High power availability from loop (>98%)
• Digital checking of double address
• Line quality information
• Bi-colour (red/green) LED driven by control panel

Technical Specification

Power supply: 15 – 40 V
Average current consumption: l= 120 μA
LED current consumption: l= 6 mA @ 24 Vdc
Operating temperature range: -30 °C to +70 °C
Humidity (non condensing): 95% RH
Relay switch characteristics: l= 2A V= 30Vdc

100-2203V Eurotech Intelligent Manual Call Point

Eurotech Intelligent Manual Call Point

The Eurotech resettable indoor call point is smooth and quick to install thanks to the easy wiring design and the front operating element that snaps into place requiring no additional tools.
The call point benefits from improved levels of visibility thanks to a reflective polyester flag at the bottom of the operating face and a brightly illuminated LED ring in the centre of the active area which allows the alarm condition to be viewed over a wide angle of 170 degrees. The alarm flag indicator can be easily reset using the call point key provided, making the call point ready for immediate re-use.
Cavius CV4002

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius CV3202

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius CV9001

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.