Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Eurotech Conventional CFP 2-8 Zone Fire Panel

Talk to our specialists

Description

C-TEC’s award-winning CFP conventional fire panels are LPCB certified to EN54-2/4 and offer an array of user and installer-friendly features.

Supplied in an attractive flush or surface mountable plastic enclosure, 2, 4 and 8 zone versions are available, each featuring four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.

The range includes Standard and Economy versions with optional repeaters, relay expansion cards and EN54-13 interface boards available for selected models.

Additional information

Specification

Approvals: Certified to EN54-2/4 by the LPCB (176b) / (0832-CPD-1704)
Mains Supply: 230 V 50/60 Hz
Mains Rated Current: 350 mA maximum
Internal Power Supply: 19 V – 28.5 V (27 V nominal). Ripple 7 V maximum (battery fault)
Total Output Current Limited to: 1.5 A @ 230 Vac (lmaxA eq 146 mA)
Quiescent Current: 25 mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Alarm Voltage: 27 V max 20 V min (final battery voltage)
Max Battery Size & Type: 2 x 12 V 3.2 Ah VRLA connected in series. Min battery size 1.2 Ah
No. of Detector Zone Circuits: 8 (Max length per circuit is 500 m)
Call Point Resistor Value: 470 to 680
Max Devices per Detector Zone: 25 detectors (or 32 detectors/manual call points combined)
No. of Conventional Sounder Circuits: 4 (max length per circuit is 500 m)
EOL Resistor Value: 6800 – 5% ToL 0/25 W (blue, grey, red, gold)
Max Sounder Output Current: 4 x 200 mA (800 mA total)
Aux Relays: Two: (1) Aux. Fire, (2) Fault, Volt free single pole changeover. Max switch current 1 A; Max switch voltage 30 Vdc
Open Collector Outputs: Two: (1) Reset (Active during reset cycle), (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max sink current 30 mA. Max open circuit voltage 27 Vdc.
Other Outputs: 24 V Aux. Power (Protected by a resettable fuse. 100 mA min. hold current. Resets when fault removed
Aux Inputs: Two: (1) Class Change (constant sounders), (2) Remote (active during any unsilenced fire condition provided all relevant delays have expired)., Max. sink current 30 mA, Max. open circuit voltage 27 Vdc
Engineer (AL3) Functions: Program coincidence (double knock) , Invoke One Man Walk Test; Program Delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters alarm; Enter fault diagnostic facilities.
Expansion Connections: Yes – for optional network driver cards (one required per repeater system) , relay output cards and EN54-13 sounder circuit interface boards.
Product Dimensions (mm): 380 W x 235 H x 96 D
Construction & Finish: Plastic lid and base – RAL7035 textured
IP Rating: IP30
Weight: 1.75 kg (without batteries)
Operating Conditions / Temperatures: -5 C to +40 C (Max RH: 95%)

Cavius CV4002

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius CV3202

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius CV9001

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Cavius CV3106

Cavius RF Heat Alarm (CV3106)

Thermal heat alarm device with wireless interlink.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area.
This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.