Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Integra Emergency Microphone Station

  • WALL MOUNT FIST MICROPHONE
  • 0, 10, 20 OR 50 SELECTION BUTTONS
  • EN54 COMPLIANT INDICATORS AND CONTROLS
  • FULLY MONITORED
  • HARDWARE BYPASS FALLBACK OPERATIOn
  • DUAL REDUNDANT OUTPUTS FOR A & BROUTERS
  • ADDITIONAL VOICE OVER IP INTERFACE, WITH POE RJ45
Part Number EMS01 Categories ,

Talk to our specialists

Description

The EMS01 Emergency Microphone Station is an EN54 compatible emergency microphone which provides All-Call functionality for making live emergency announcements to entire facilities. The microphone provides EN54 compliant emergency functions and all EN54 mandatory indicators and controls.

The microphone is housed in a lockable wall-mounting box and features a graphic LCD display together with indicators for ‘Power’, ‘Voice Alarm’, ‘System Fault’,
‘Fault’ and ‘Speak Now’. The LCD display provides remote access to the list of active faults in the PA/VA system, while the EN54 mandated control keys enable navigation through the fault list, and also provide remote fault acceptance and clearance.

The EMS01 has multiple PA/VA system interfaces. It can be connected directly to either one or two of our audio routers, enabling multiple options for system redundancy. The EMS01 will operate in an All-Call hardware bypass safety mode even in the event of processor failure within the host Voice Alarm Router.

There is also a licensed non-EN54 RJ45 Ethernet IP interface with Power over Ethernet capability for VoIP connections to our IP based PA/VA systems. All interconnect cabling and the microphone capsule is continuously monitored foropen and shortcircuits.

Top, bottom and rear cable entry points are provided by means of ‘knock-outs’ in the enclosure, while the field connections are provided by means of a set of terminals on the inside rear panel of the back box.

The EMS01 is compatible with our whole range of Voice Alarm and Public Address systems, and is designed to comply with EN54-16, ISO 7240-16 and BS5839-8. Versions with multiple PA/VA zone select buttons are also available for applications which require this.

SOC-E3N(WHT)

Hochiki Conventional Photoelectric Smoke Detector – White

The SOC-E3N(WHT) is an optical Smoke Detector, which is fully compatible with the majority of existing Conventional systems. The SOC-E3N incorporates Hochiki’s unique High Performance photoelectric smoke chamber removing the need to use Ionisation Detectors in the majority of applications.

DCD-AE3

Hochiki Conventional Rate of Rise Heat Detector – White

DCD-AE3 is a Rate of Rise Heat Detector with a 60 °C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.

ALN-ENWHT

Hochiki Photoelectric Smoke Sensor – White Case

Model ALN-EN-WHT is a Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ALN-EN incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications.

Hochiki-HCP-EBLU-SCI

Hochiki Addressable Call Point with SCI – Blue

Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.