Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

XFP 1 Loop 16 Zone Addressable Fire Panel (XFP501E/H)

Part Number XFP501E/H -

Talk to our specialists

Description

C-TEC’s XFP single loop 16 zone addressable fire alarm panel offers high performance at a very competitive price.

LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Hochiki’s ESP protocol.

Additional information

Additional Information

Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe’s best-selling entry-level addressable fire panels. Packed full of engineering features, the XFP501E/H is also fully compatible with CTEC’s Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.

Key Features

• Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
• Compatibility with Hochiki’s ESP protocol.
• Two independently programmable conventional sounder circuits.
• Two programmable inputs.
• A fault output relay and three programmable relay outputs with voltage free changeover contacts.
• A selection of zone dependency/coincidence functions.
• A day/night (building occupied/unoccupied) function.
• An investigation delay period function.
• Phased evacuation facility.
• An alarm counter that records how many times the panel has been in alarm state.
• Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
• An integral EN54-4/A2 switch mode power supply.
• Adjustable contamination levels.
• Earth fault monitoring.
• Combined keypad / keyswitch entry to Access Levels 2 and 3.
• 999 event monitoring.
• An intuitive Windows based upload-download PC program.
• Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 non-redundant network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.

100-2203V Eurotech Intelligent Manual Call Point

Eurotech Intelligent Manual Call Point

The Eurotech resettable indoor call point is smooth and quick to install thanks to the easy wiring design and the front operating element that snaps into place requiring no additional tools.
The call point benefits from improved levels of visibility thanks to a reflective polyester flag at the bottom of the operating face and a brightly illuminated LED ring in the centre of the active area which allows the alarm condition to be viewed over a wide angle of 170 degrees. The alarm flag indicator can be easily reset using the call point key provided, making the call point ready for immediate re-use.
Cavius CV4002

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius CV3202

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius CV9001

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.