Speak to our experts

Speak to our experts

+44 (0) 203 141 0999

Advanced GO Single Loop Fire Control Panel (GO1+ & GO1V)

Part Number GO1+ & GO1V Categories ,

Talk to our specialists

Description

The new Advanced Go GO1+ & GO1V is an evolution for non-networked single loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features, while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.

Additional information

Further Description

A new ergonomic layout of control panel is combined with our high resolution, high contrast, graphical LCD display. The tactile keypad allows simple select-and-click programming for faster engineer configuration and simple end-user operation.

Two performance options are available with a different maximum number of configurable addresses, allowing greater flexibility for site-specific installations: Go and Go+

Functional improvements include integral zonal LEDs which enable instant identification of alarm locations, and ensure compliance with BS5839 without the cost of a separate LED zone card.

The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed microprocessor technology, for 9 times faster operation than MxPro 4.

Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications, from small to medium systems.

All Go series panels are fully programmable on site via the control panel display or with our updated, easy-to-use PC Configuration Tool.

Features

• Multiprotocol support, Apollo (Discovery, XP95), Hochiki (ESP) & Argus (VEGA)
• Graphical LCD user interface, LED indicators & push buttons
• Installer-friendly Auto-learn, Loop detection and On-board scope facility
• 500 fire + 5000 general event logging, with advanced diagnostic precision to aid installation & fault-finding
• Integral 15 Zone LEDs ensures compliance with BS5839, with 35 additional software indication zones
• Uses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programming
• Two on-board Sounder outputs, three on-board Relay outputs
• Optional 3 monitored input/outputs for Fire/Fault routing (with P-Bus adaptor & routing card) for full EN54 compliance when connected to an Alarm Receiving Centre
• Dedicated USB Type B port for direct PC connection
• Future ethernet connectivity to AdvancedLive, which will provide remote notification and panel management
• Innovative ‘no hinge’ removable door and hangable chassis for easier installation
• Employing an identical monitoring feature as the Mx-5000 series, the Go series meets the requirements of EN54-13 (2005) Clauses 5.3.4.1 and 5.3.4.2 (partial open & short circuits) for optimal fire system performance and complete peace of mind
• EN54-2 (1997) +A1:2006
• EN54-4 (1997) +A1:2002 +A1:2006
• Certified to EN54 Parts 2 and 4 by FM Approvals

Cavius CV4002

Cavius CO Alarm (CV4002)

Carbon monoxide alarm device.
Designed for installation in private homes, camping trailers, mobile homes and caravans.
The alarm will make a CO sensor reading every 30 seconds if the concentration is less than 200ppm. At 200ppm or higher the readings will be made every 10 seconds.

Cavius CV3202

Cavius RF Mains Powered Heat Alarm (CV3202)

Mains powered thermal heat alarm device with wireless interlink and battery back-up.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area. This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.

Cavius CV9001

Cavius Smart Remote (CV9001)

Smart remote with emergency light.
Designed to alert with a rapid flashing warning light, vibration and buzzing when alarming and to remote control the CAVIUS Wireless alarms Family. Torch function to find escape routes at night.

Cavius CV3106

Cavius RF Heat Alarm (CV3106)

Thermal heat alarm device with wireless interlink.
Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area.
This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.

Need to talk to a member of the team?

Our support and sales team would love to help with any questions. Feel free to leave your details and we will get back to you shortly.